TUFLOW Message 2222: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
No edit summary |
No edit summary |
||
| Line 4: | Line 4: | ||
|type=[[ERROR]] |
|type=[[ERROR]] |
||
[[WARNING]] |
[[WARNING]] |
||
|message_desc=The period attribute in a variable z shape layer (2d_vzsh) defines the time in hours over which the variation in Zpt elevations occurs. This <u>'''must'''</u> be greater than zero. From 2020-01-AB warning is issued if Period attribute is greater than zero, but below 0.01hr. Previously Period under 0.001hr was recognised as zero and error issued. |
|message_desc=The period attribute in a variable z shape layer (2d_vzsh) defines the time in hours over which the variation in Zpt elevations occurs. This <u>'''must'''</u> be greater than zero. From 2020-01-AB warning is issued if Period attribute is greater than zero, but below 0.01hr. Previously Period under 0.001hr was recognised as zero and error was issued. |
||
|suggestions=Set a valid period in the GIS layer and/or check the very short period is intentional. |
|suggestions=Set a valid period in the GIS layer and/or check the very short period is intentional. |
||
|discussion_page=* [[Talk:TUFLOW Message 2222|Discuss Message 2222]] |
|discussion_page=* [[Talk:TUFLOW Message 2222|Discuss Message 2222]] |
||
Revision as of 14:53, 7 May 2020
TUFLOW Message
ERROR 2222 - Period attribute (eg. time taken for failure) must be greater than zero.
Alternate Message
WARNING 2222 - Period attribute (eg. time taken for failure) is very short.
Description
The period attribute in a variable z shape layer (2d_vzsh) defines the time in hours over which the variation in Zpt elevations occurs. This must be greater than zero. From 2020-01-AB warning is issued if Period attribute is greater than zero, but below 0.01hr. Previously Period under 0.001hr was recognised as zero and error was issued.
Suggestions
Set a valid period in the GIS layer and/or check the very short period is intentional.
| Up |
|---|
 2xxx Messages
|