Revision as of 00:28, 5 March 2022 view source Ellis Symons (talk \| contribs) Bureaucrats, Administrators 3,091 edits →Processing Options ← Older edit		Revision as of 00:28, 5 March 2022 view source Ellis Symons (talk \| contribs) Bureaucrats, Administrators 3,091 edits →Processing Options Newer edit →
Line 14: <ul> <li>Based on inverts - will change the pipe direction if there is an adverse gradient (downstream invert is higher than the upstream invert). Recommended only if it is apparent from an initial, manual inspection that the pipe dataset has occurrences of this error (i.e. not recommended to run this option by default without first confirming it's needed).<br><br> ''Note:<br>This ~~tool~~option will only correct pipe direction if the adverse inverts are in the channel attribute data (i.e. if elevations are stored at the pits, then this option will not change the pipe direction).''<br><Br> <li>Based on pipe direction continuity - This option will perform a basic check based on the incoming and outgoing pipe directions. If the upostream or downstream junction has 3 or more pipes entering/leaving, the tool will not change the pipe direction as the continuity at these locations can be ambiguous. </ul>

1D Integrity Tool - Pipe Direction: Difference between revisions