Difference between revisions of "TUFLOW Message 2140"

Revision as of 15:33, 4 October 2011

TUFLOW Message
ERROR 2140 - Reading following line in control file.

Alternate Message
NA

Message Type
ERROR

Description
An error occurred reading the following line in the control file.

Suggestions
Check the line is a valid TUFLOW command for the version of TUFLOW that you are running. Common mistake are:

Omitting the double equals (Set IWL = 0.6 not Set IWL == 0.6)
Using the Read GIS syntax for versions of TUFLOW prior to 2010 (use Read MI instead
Putting a command in the wrong file, e.g. putting a geometry (.tgc) command in the boundary file (.tbc)

Up
2xxx Messages

Revision as of 15:31, 4 October 2011 (view source) tuflow>Par ← Older edit	Revision as of 15:33, 4 October 2011 (view source) tuflow>Par m (Protected "TUFLOW Message 2140": High traffic page ([edit=sysop] (indefinite))) Newer edit →
(No difference)