Revision as of 01:15, 28 May 2022 view source Ellis Symons (talk \| contribs) Bureaucrats, Administrators 3,092 edits No edit summary ← Older edit		Revision as of 01:18, 28 May 2022 view source Ellis Symons (talk \| contribs) Bureaucrats, Administrators 3,092 edits No edit summary Newer edit →
Line 43: * Detailed Description Rule 2: Flag as unstable if the minimum and maximum values occur within '''<tt>FORWARD_LOOK_COUNT</tt>''' number of timesteps. This will not be flagged if the minimum value occurs at the first timestep. * Detailed Description Rule 3: The following rule uses a <tt>'''TOLERANCE'''</tt> value defined as <pre>TOLERANCE = PERC_DIFF_BETWEEN_MAX_AND_TS multiplied by the time series range (time series max value - time series min value).</pre> : Flag as unstable if the max value is outside of the time series byequal to, or greater than the '''<tt>TOLERANCE</tt>''' value (outside means either not close to any of the data points or an interpolated value if the time of max falls inbetween data points)<br> * Detailed Description Rule 4: Same as rule 3 however with the minimum value rather than the maximum value * Detailed Description Rule 5: The following rule uses a <tt>'''TOLERANCE'''</tt> value defined as <pre>TOLERANCE = UNSTABLE_PERC_LIMIT multiplied by the time series range (time series max value - time series min value).</pre> : This rule also defines a bounce as where there are consecutive gradient sign changes<br> : e.g.<br>

QGIS TUFLOW Apply Stability Styling: Difference between revisions