TUFLOW Message 1101: Difference between revisions
No edit summary |
No edit summary |
||
| Line 5: | Line 5: | ||
|message_desc=1D network layers should have the GIS attributes as described in Table 4.14 1D Model Network (1d_nwk) Attribute Descriptions of the TUFLOW Manual (2010 version). |
|message_desc=1D network layers should have the GIS attributes as described in Table 4.14 1D Model Network (1d_nwk) Attribute Descriptions of the TUFLOW Manual (2010 version). |
||
|suggestions=Check the GIS attributes match those described in the TUFLOW manual or a 1d_nwk_empty layer created with the latest TUFLOW release. If it seems to be correct, recreate the layer from scratch using a 1d_nwk empty layer created with the latest TUFLOW release. <br> |
|suggestions=Check the GIS attributes match those described in the TUFLOW manual or a 1d_nwk_empty layer created with the latest TUFLOW release. If it seems to be correct, recreate the layer from scratch using a 1d_nwk empty layer created with the latest TUFLOW release. <br> |
||
Check that the 1d_nwk layer being read in via the 'Read GIS Network == ' command is a network and not a boundary condition (1d_bc) or cross-section (1d_tab / 1d_xs) layer. |
Check that the 1d_nwk layer being read in via the '<font color="blue"><tt>Read GIS Network </tt></font><font color="red"><tt>== </tt></font>' command is a network and not a boundary condition (1d_bc) or cross-section (1d_tab / 1d_xs) layer. |
||
|discussion_page=* [[Talk:TUFLOW Message 1101|Discuss Message 1101]] |
|discussion_page=* [[Talk:TUFLOW Message 1101|Discuss Message 1101]] |
||
|link3='' |
|link3='' |
||
Revision as of 13:44, 23 June 2022
TUFLOW Message
ERROR 1101 - Less than the mandatory 20 1d_nwk attributes found
Alternate Message
ERROR 1101 - Less than the mandatory 10 1d_pit attributes found.
Message Type
ERROR
Description
1D network layers should have the GIS attributes as described in Table 4.14 1D Model Network (1d_nwk) Attribute Descriptions of the TUFLOW Manual (2010 version).
Suggestions
Check the GIS attributes match those described in the TUFLOW manual or a 1d_nwk_empty layer created with the latest TUFLOW release. If it seems to be correct, recreate the layer from scratch using a 1d_nwk empty layer created with the latest TUFLOW release.
Check that the 1d_nwk layer being read in via the 'Read GIS Network == ' command is a network and not a boundary condition (1d_bc) or cross-section (1d_tab / 1d_xs) layer.
| Up |
|---|
 1xxx Messages
|