Difference between revisions of "TUFLOW Message 2461"
Jump to navigation
Jump to search
| Line 5: | Line 5: | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
|message_desc=The global rainfall commands: | |message_desc=The global rainfall commands: | ||
| − | * <tt>Global Rainfall Area Factor == <value></tt> | + | * <tt><font color="blue">Global Rainfall Area Factor </font><font color="red">== </font><value></tt> |
| − | * <tt>Global Rainfall Initial Loss == <value></tt> | + | * <tt><font color="blue">Global Rainfall Initial Loss </font><font color="red">== </font><value></tt> |
| − | * <tt>Global Rainfall Initial Loss == <value></tt> | + | * <tt><font color="blue">Global Rainfall Initial Loss </font><font color="red">== </font><value></tt> |
should be specified prior to any <tt>Global Rainfall BC == <boundary name></tt> command. | should be specified prior to any <tt>Global Rainfall BC == <boundary name></tt> command. | ||
|suggestions=Change the order of the commands in the boundary control file (.tbc) to ensure that the rainfall loss and rainfall factor commands occur before the <tt>Global Rainfall BC == <boundary name></tt> command. | |suggestions=Change the order of the commands in the boundary control file (.tbc) to ensure that the rainfall loss and rainfall factor commands occur before the <tt>Global Rainfall BC == <boundary name></tt> command. | ||
Revision as of 13:19, 27 June 2022
TUFLOW Message
ERROR 2461 - "Global Rainfall Area Factor" applied after "Global Rainfall BC".
Alternate Message
ERROR 2461 - "Global Rainfall Initial Loss" applied after "Global Rainfall BC".
ERROR 2461 - "Global Rainfall Initial Loss" applied after "Global Rainfall BC".
Message Type
ERROR
Description
The global rainfall commands:
- Global Rainfall Area Factor == <value>
- Global Rainfall Initial Loss == <value>
- Global Rainfall Initial Loss == <value>
should be specified prior to any Global Rainfall BC == <boundary name> command.
Suggestions
Change the order of the commands in the boundary control file (.tbc) to ensure that the rainfall loss and rainfall factor commands occur before the Global Rainfall BC == <boundary name> command.
| Up |
|---|
 2xxx Messages
|