TUFLOW Message 2618: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
Created page with "{{TUFLOW_Message |tuflow_message=WARNING 2618 - F1 rainfall factor of 0 set to 1. RF Name: <name> |alt_msg=WARNING 2618 - F2 rainfall factor of 0 set to 1. RF Name: <name> |ty..." |
No edit summary |
||
| Line 5: | Line 5: | ||
|message_desc=The F1 or F2 attribute in the GIS table for the rainfall point layer has not been set and is zero (or less). These factors are applied as a multiplier on the rainfall boundary. |
|message_desc=The F1 or F2 attribute in the GIS table for the rainfall point layer has not been set and is zero (or less). These factors are applied as a multiplier on the rainfall boundary. |
||
|suggestions=It is recommended that if no rainfall factor is desired that these are set to 1 for clarity. A value of 1 has overwritten the specified value of 0. |
|suggestions=It is recommended that if no rainfall factor is desired that these are set to 1 for clarity. A value of 1 has overwritten the specified value of 0. |
||
|discussion_page=* [[Talk:TUFLOW Message 2618|Discuss Message 2618]] |
|||
|link3='' |
|||
|link4='' |
|||
|prelink=[[TUFLOW_Message_2617|Message 2617]] |
|prelink=[[TUFLOW_Message_2617|Message 2617]] |
||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] |
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] |
||
Revision as of 16:09, 12 July 2022
TUFLOW Message
WARNING 2618 - F1 rainfall factor of 0 set to 1. RF Name: <name>
Alternate Message
WARNING 2618 - F2 rainfall factor of 0 set to 1. RF Name: <name>
Message Type
WARNING
Description
The F1 or F2 attribute in the GIS table for the rainfall point layer has not been set and is zero (or less). These factors are applied as a multiplier on the rainfall boundary.
Suggestions
It is recommended that if no rainfall factor is desired that these are set to 1 for clarity. A value of 1 has overwritten the specified value of 0.
| Up |
|---|
 2xxx Messages
|