Difference between revisions of "TUFLOW Message 3027"

From Tuflow
Jump to navigation Jump to search
Line 8: Line 8:
 
|suggestions=A limiting Manning’s n value (based on the n value that would normally be applied) is specified to transition to conventional n values at greater depths.
 
|suggestions=A limiting Manning’s n value (based on the n value that would normally be applied) is specified to transition to conventional n values at greater depths.
  
|discussion_page=* [[Talk:TUFLOW Message 3027|Discuss Message 3027]]
 
|link3=''
 
|link4=''
 
 
|prelink=[[TUFLOW_Message_3026|Message 3026]]
 
|prelink=[[TUFLOW_Message_3026|Message 3026]]
 
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]]
 
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]]
 
|nextlink=[[TUFLOW_Message_3028|Message 3028]]
 
|nextlink=[[TUFLOW_Message_3028|Message 3028]]
 
}}
 
}}

Revision as of 15:19, 13 July 2022

TUFLOW Message
ERROR 3027: Roughness height specified but nLim less than 0.

Alternate Message
None

Message Type
ERROR

Description
The limiting Manning’s n value, required for specifying bed resistance with the theoretically derived log law for shallow flows, must be greater than or equal to 0.0.

Suggestions
A limiting Manning’s n value (based on the n value that would normally be applied) is specified to transition to conventional n values at greater depths.


Up
Go-up.png 3xxx Messages