TUFLOW Message 0020: Difference between revisions
No edit summary |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 9: | Line 9: | ||
Note: -s and -s1 are treated as being the same, therefore this message will occur if -s and -s1 are specified. Similarly for -e and -e1. If multiple scenarios or events are to be simulated <tt>-e1 <event1> -e2 <event2> or -s1 <scenario1> -s2 <scenario2></tt> can be used. Up to 9 events and scenarios can be specified for a single simulation (although this would be vary rare!) |
Note: -s and -s1 are treated as being the same, therefore this message will occur if -s and -s1 are specified. Similarly for -e and -e1. If multiple scenarios or events are to be simulated <tt>-e1 <event1> -e2 <event2> or -s1 <scenario1> -s2 <scenario2></tt> can be used. Up to 9 events and scenarios can be specified for a single simulation (although this would be vary rare!) |
||
|suggestions=Check and correct the repeat occurrences of the -e or -s option(s). |
|suggestions=Check and correct the repeat occurrences of the -e or -s option(s). |
||
<br> |
|||
|discussion_page=* [[Talk:TUFLOW Message 0020|Discuss Message 0020]] |
|||
|link3='' |
|||
|link4='' |
|||
|prelink=[[TUFLOW_Message_0015|Message 0015]] |
|||
|uplink=[[0xxx_TUFLOW_Messages|0xxx Messages]] |
|uplink=[[0xxx_TUFLOW_Messages|0xxx Messages]] |
||
|nextlink=[[TUFLOW_Message_0021|Message 0021]] |
|||
}} |
}} |
||
Latest revision as of 09:25, 22 December 2022
TUFLOW Message
ERROR 0020 - Event/Scenario name already specified for -e/-s option.
Alternate Message
NA
Message Type
ERROR
Description
This ERROR occurs when the -e or -s option occurs for the same ID.
For example, if "-s1 exg -s1 OpA -s2 OpB" is specified when running TUFLOW, s1 has occurred twice, and therefore the intent is unclear.
Note: -s and -s1 are treated as being the same, therefore this message will occur if -s and -s1 are specified. Similarly for -e and -e1. If multiple scenarios or events are to be simulated -e1 <event1> -e2 <event2> or -s1 <scenario1> -s2 <scenario2> can be used. Up to 9 events and scenarios can be specified for a single simulation (although this would be vary rare!)
Suggestions
Check and correct the repeat occurrences of the -e or -s option(s).
| Up |
|---|
 0xxx Messages
|