Difference between revisions of "TUFLOW Message 0038"
Jump to navigation
Jump to search
| (One intermediate revision by the same user not shown) | |||
| Line 5: | Line 5: | ||
|message_desc=If using the <tt><font color="blue">Set IWL </font><font color="red">== </font> Auto</tt> feature, the IWL in the model is automatically set based on the water level at the downstream boundary. In this a varying HT boundary in the 2D model has been used and TUFLOW is unable to set the IWL automatically. | |message_desc=If using the <tt><font color="blue">Set IWL </font><font color="red">== </font> Auto</tt> feature, the IWL in the model is automatically set based on the water level at the downstream boundary. In this a varying HT boundary in the 2D model has been used and TUFLOW is unable to set the IWL automatically. | ||
|suggestions=Ensure that only a single water level boundary is used or remove the <tt><font color="blue">Set IWL </font><font color="red">== </font> Auto</tt> command and set the IWL manually using the <tt><font color="blue">Set IWL </font><font color="red">== </font> <value>, <font color="blue">Read GIS IWL </font><font color="red">== </font> <gis layer> or <font color="blue">Read Grid IWL </font><font color="red">== </font> <grid dataset></tt> commands. | |suggestions=Ensure that only a single water level boundary is used or remove the <tt><font color="blue">Set IWL </font><font color="red">== </font> Auto</tt> command and set the IWL manually using the <tt><font color="blue">Set IWL </font><font color="red">== </font> <value>, <font color="blue">Read GIS IWL </font><font color="red">== </font> <gis layer> or <font color="blue">Read Grid IWL </font><font color="red">== </font> <grid dataset></tt> commands. | ||
| − | + | <br> | |
| − | + | ||
| − | |||
| − | |||
|uplink=[[0xxx_TUFLOW_Messages|0xxx Messages]] | |uplink=[[0xxx_TUFLOW_Messages|0xxx Messages]] | ||
| − | |||
}} | }} | ||
Latest revision as of 10:03, 22 December 2022
TUFLOW Message
ERROR 0038 - Could not apply Set IWL == AUTO due to varying 2D HT boundary.
Alternate Message
NA
Message Type
ERROR
Description
If using the Set IWL == Auto feature, the IWL in the model is automatically set based on the water level at the downstream boundary. In this a varying HT boundary in the 2D model has been used and TUFLOW is unable to set the IWL automatically.
Suggestions
Ensure that only a single water level boundary is used or remove the Set IWL == Auto command and set the IWL manually using the Set IWL == <value>, Read GIS IWL == <gis layer> or Read Grid IWL == <grid dataset> commands.
| Up |
|---|
 0xxx Messages
|