TUFLOW Message 1041: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
No edit summary |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 7: | Line 7: | ||
Specify inverts upstream and downstream of the culvert, either via the US_invert / DS_invert in the 1D channel object or via snapped 1D node objects. |
Specify inverts upstream and downstream of the culvert, either via the US_invert / DS_invert in the 1D channel object or via snapped 1D node objects. |
||
|discussion_page=* [[Talk:TUFLOW Message 1041|Discuss Message 1041]] |
|||
|link3='' |
|||
|link4='' |
|||
|prelink=[[TUFLOW_Message_1037|Message 1037]] |
|||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] |
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] |
||
|nextlink=[[TUFLOW_Message_1042|Message 1042]] |
|||
}} |
}} |
||
Latest revision as of 13:52, 22 December 2022
TUFLOW Message
ERROR 1041 - Culvert branch splits downstream of channel ",a," at Node ",a,". Could not interpolate invert.
Alternate Message
ERROR 1041 - Culvert branch splits upstream of channel ",a," at Node ",a,". Could not interpolate invert.
Message Type
ERROR
Description
Multiple upstream or downstream channel, unable to interpolate inverts.
Suggestions
A useful tip at a junction of 1D channels is to use a connector (Channel_Type of “X”) for connecting a side tributary or pipe into the main flowpath. TUFLOW will then be able to interpolate inverts.
Specify inverts upstream and downstream of the culvert, either via the US_invert / DS_invert in the 1D channel object or via snapped 1D node objects.
| Up |
|---|
 1xxx Messages
|