Difference between revisions of "TUFLOW Message 1124"

From Tuflow
Jump to navigation Jump to search
 
(2 intermediate revisions by 2 users not shown)
Line 3: Line 3:
 
|alt_msg=NA
 
|alt_msg=NA
 
|type=[[ERROR]]
 
|type=[[ERROR]]
−
|message_desc=There isn't an available cross section for channel "a".
+
|message_desc=If a 1d_xs cross-section line crosses with a 1d channel midway, it can only allocated to one channel.
−
|suggestions=If the cross section has three vertices, middle vertex should be snapped to the beginning or end of channel "a". Cross sections with two vertices only needs to intersect the channel.  
+
|suggestions=Check if the cross-section line is crossing with multiple 1d channels.  
−
|discussion_page=* [[Talk:TUFLOW Message 1124|Discuss Message 1124]]
+
 
−
|link3=''
 
−
|link4=''
 
−
|prelink=[[TUFLOW_Message_1123|Message 1123]]
 
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
−
|nextlink=[[TUFLOW_Message_1125|Message 1125]]
 
 
}}
 
}}

Latest revision as of 15:19, 22 December 2022

TUFLOW Message
ERROR 1124 - Cross-section line for channel ",a," already allocated to another channel.

Alternate Message
NA

Message Type
ERROR

Description
If a 1d_xs cross-section line crosses with a 1d channel midway, it can only allocated to one channel.

Suggestions
Check if the cross-section line is crossing with multiple 1d channels.


Up
Go-up.png 1xxx Messages
Retrieved from "https://wiki.tuflow.com/w/index.php?title=TUFLOW_Message_1124&oldid=30846"