Difference between revisions of "TUFLOW Message 2062"

From Tuflow
Jump to navigation Jump to search
 
Line 6: Line 6:
 
|suggestions=SC line should only be used with SH boundary object.  For SX and HX connections use CN objects.
 
|suggestions=SC line should only be used with SH boundary object.  For SX and HX connections use CN objects.
  
|prelink=[[TUFLOW_Message_2061|Message 2061]]
+
 
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
|nextlink=[[TUFLOW_Message_2063|Message 2063]]
 
 
}}
 
}}

Latest revision as of 11:54, 23 December 2022

TUFLOW Message
ERROR 2062 - SC connection cannot connect to a HX line.

Alternate Message
NA

Message Type
ERROR

Description
Source conection (SC) cannot snap to a 1D/2D interface (HX) line. Source connections can only be connected to a Source versus Water Level (SH) boundary object.

Suggestions
SC line should only be used with SH boundary object. For SX and HX connections use CN objects.


Up
Go-up.png 2xxx Messages