Difference between revisions of "TUFLOW Message 2310"

Latest revision as of 14:26, 7 February 2023

TUFLOW Message
ERROR 2310 - Restart commands not yet supported by the GPU Solver.

Alternate Message
NA

Message Type
ERROR

Description
The restart file functionality is not yet support if using the GPU module.

Suggestions
Please remove the restart file commands if using GPU solver.

Up
2xxx Messages

@@ Line 1: / Line 1: @@
 {{TUFLOW_Message
-|tuflow_message=ERROR 2310 - "End If" found in incorrect location.
+|tuflow_message=ERROR 2310 - Restart commands not yet supported by the GPU Solver.
 |alt_msg=NA
 |type=[[ERROR]]
-|message_desc=<font color="green"><tt>End If</tt></font> statement is in the wrong location.  This command should follow a <font color="green"><tt>If Scenario == </tt></font> command.  Every <font color="green"><tt>If Scenario </tt></font> scenario should have an <font color="green"><tt>End If</tt></font>. For more details on <font color="green"><tt>If Scenario == </tt></font> logic see Section 4.12.2 of 2010 TUFLOW manual.
+|message_desc=The restart file functionality is not yet support if using the GPU module.
-|suggestions=Make sure <font color="green"><tt>End If</tt></font> appears after an <font color="green"><tt>If Scenario == </tt></font>
+|suggestions=Please remove the restart file commands if using GPU solver.
-|discussion_page=* [[Talk:TUFLOW Message 2310|Discuss Message 2310]]
-|link3=''
-|link4=''
-|prelink=[[TUFLOW_Message_2309|Message 2309]]
 |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
-|nextlink=[[TUFLOW_Message_2311|Message 2311]]
 }}