TUFLOW Message 2365: Difference between revisions

* The 2d_bc “d” attribute can be used to set the maximum depth of the automatically generated HQ curve (note d is a depth, not an elevation). This option assumes glass walls at the edges of the HQ line, e.g. there is no additional flow area to the sides, it does not take into account the increase in floodplain storage as the water surface level goes up. This might artificially inflate water surface levels immediately downstream and understate the flood extent.

<ol>[[File: HQ_Wiki-03.jpg|550px]]</ol>

 

|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]

}}