Tuflow

TUFLOW Message 3036: Difference between revisions

Browse history interactively
← Older editNewer edit →
Content deleted Content added
VisualWikitext
No edit summary
No edit summary
Line 1:
{{TUFLOW_Message
|tuflow_message=ERROR 3036: - Hydrograph weight data not in range [0 ... 6.5535].
<br>
|alt_msg=NoneNA<br>
 
|type=[[ERROR]]
|message_desc=It is possible to apply spatial weighting factors when cells reference nearby hyteograph rainfall data records.
|message_desc=Hydrographs were not accepted by the HPC solver. Prior to 2020-10-AA release this error was caused by multiplication factors f1 and f2 in the 2d_rf layer other than 1.
In HPC these are discretised as integers, and the original floating point weights must be in range 0 to 6.5535.
|suggestions=Use the latest TUFLOW release. If multiplication factors other than 1 are used and TUFLOW version cannot be updated, multiplication should be applied to the source hydrographs rather than the factors f1 and f2.<br>
 
If the above doesn't apply, please contact <u>[mailto:support@tuflow.com support@tuflow.com]</u>.▼
|suggestions=If certain hyteograph records are being scaled with factors greater than one, then consider increasing the original source data for
▲Ifthese hyteographs so that the aboveweighting doesn'tvalues apply,can pleasebe decreased. <br>Please contact <u>[mailto:support@tuflow.com support@tuflow.com]</u> for further assistance.
 
|prelink=[[TUFLOW_Message_3035|Message 3035]]
Retrieved from "https://wiki.tuflow.com/TUFLOW_Message_3036"