Difference between revisions of "TUFLOW Message 2444"
Jump to navigation
Jump to search
| (5 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
{{TUFLOW_Message | {{TUFLOW_Message | ||
| − | |tuflow_message=ERROR 2444 - | + | |tuflow_message=ERROR 2444 - ZU of "a" outside Zpt Range Check. |
| − | |alt_msg=WARNING 2444 - | + | |alt_msg=WARNING 2444 - ZU of "a" outside Zpt Range Check. |
|type=[[ERROR]]<br>[[WARNING]] | |type=[[ERROR]]<br>[[WARNING]] | ||
|message_desc=An ERROR (2012-05 TUFLOW release) or a WARNING (if Defaults==pre-2012) is issued if a final zpt elevation less than zmin or greater than zmax as defined by the command '''Zpt Range Check''' has been found. | |message_desc=An ERROR (2012-05 TUFLOW release) or a WARNING (if Defaults==pre-2012) is issued if a final zpt elevation less than zmin or greater than zmax as defined by the command '''Zpt Range Check''' has been found. | ||
|suggestions=Import in the messages.MIF/.SHP file and check for erroneous zpt elevations outside of the ranges for zmin and zmax. If these have not been manually defined using the command '''Zpt Range Check''', the default values are -9998 for zmin and 99998 for zmax. | |suggestions=Import in the messages.MIF/.SHP file and check for erroneous zpt elevations outside of the ranges for zmin and zmax. If these have not been manually defined using the command '''Zpt Range Check''', the default values are -9998 for zmin and 99998 for zmax. | ||
| − | + | ||
| − | + | ||
| − | |||
| − | |||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
| − | + | ||
}} | }} | ||
Latest revision as of 08:54, 3 March 2023
TUFLOW Message
ERROR 2444 - ZU of "a" outside Zpt Range Check.
Alternate Message
WARNING 2444 - ZU of "a" outside Zpt Range Check.
Description
An ERROR (2012-05 TUFLOW release) or a WARNING (if Defaults==pre-2012) is issued if a final zpt elevation less than zmin or greater than zmax as defined by the command Zpt Range Check has been found.
Suggestions
Import in the messages.MIF/.SHP file and check for erroneous zpt elevations outside of the ranges for zmin and zmax. If these have not been manually defined using the command Zpt Range Check, the default values are -9998 for zmin and 99998 for zmax.
| Up |
|---|
 2xxx Messages
|