Difference between revisions of "TUFLOW Message 2579"

From Tuflow
Jump to navigation Jump to search
(One intermediate revision by one other user not shown)
Line 5: Line 5:
 
|type=[[ERROR]]
 
|type=[[ERROR]]
 
|message_desc=Unrecognised command after "<>", "<>": "<>".
 
|message_desc=Unrecognised command after "<>", "<>": "<>".
|suggestions=Please contact [mailto:support@tuflow.com support@tuflow.com].
+
|suggestions=Check the command is correct and is written in correct control file.
  
|prelink=[[TUFLOW_Message_2578|Message 2578]]
 
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
|nextlink=[[TUFLOW_Message_2580|Message 2580]]
 
 
}}
 
}}

Revision as of 12:46, 5 October 2023

TUFLOW Message
ERROR 2579 - Unrecognised command after "<>", "<>": "<>".

Alternate Message
NA

Message Type
ERROR

Description
Unrecognised command after "<>", "<>": "<>".

Suggestions
Check the command is correct and is written in correct control file.


Up
Go-up.png 2xxx Messages