TUFLOW SWMM Tutorial Introduction: Difference between revisions
Content deleted Content added
Chris Huxley (talk | contribs) |
|||
Line 1:
On request from USA XPSWMM users, TUFLOW linkage with 1D EPA Storm Water Management Model (SWMM) has been added as a supported feature
<br>▼
This EPA SWMM series of tutorials
= Introduction =
The following tutorial models are aimed at new and experienced users, stepping through the process of building and running TUFLOW SWMM together. The main objective aims to demonstrate the ability for TUFLOW to link to 1D EPA SWMM in a variety of different common use case scenarios.
'''Note, if you are not already familiar with TUFLOW, we recommend first completing Module 1 and 2 of the <u>[[Tutorial_Introduction | "TUFLOW Only" Tutorials]]</u> to establish an understanding of 2D modeling, before progressing to learning how to link 1D EPA SWMM to 2D TUFLOW.'''<br>
<br>TUFLOW has supported 1D/2D dynamic coupling since its initial 2D solver development in 1989. Traditionally, 1D (1 Dimensional) linking and associated modeling has been applied using TUFLOW's 1D solver, ESTRY. As demonstrated in:
:*<u>[[Tutorial_M03 | Module 3 - 1D Culverts]]</u>
:*<u>[[Tutorial_M05 | Module 5 - Integrated Urban Pipe Network Drainage]]</u>
Line 8 ⟶ 14:
▲On request from USA XPSWMM users, TUFLOW linkage with 1D EPA Storm Water Management Model (SWMM) has been added as a supported feature. It is available in TUFLOW 2023-03-AD release or newer. EPA SWMM is a widely used software for simulating urban watershed hydrologic and 1D hydraulic behaviour. Initially developed in the early 1970's by the USA Environmental Protection Agency (EPA), the software has since undergone numerous updates and enhancements to become one of the most used 1D stormwater runoff and water quality analysis tools globally, particularly in North America. The primary uses of EPA SWMM include designing and evaluating stormwater systems and also planning and assessment of low-impact development (also known as Water Sensitive Urban Design) techniques. For more details about EPA SWMM, please visit: <u>[https://www.epa.gov/water-research/storm-water-management-model-swmm</font> https://www.epa.gov/water-research/storm-water-management-model-swmm]</u>. Note, if you are not already familiar with TUFLOW, we recommend first completing Module 1 and 2 of the <u>[[Tutorial_Introduction | "TUFLOW Only" Tutorials]]</u> to establish an understanding of 2D modeling, before progressing to learning how to link 1D EPA SWMM to 2D TUFLOW.<br>
▲<br>
▲This EPA SWMM series of tutorials have been written in USA English, instead of British English, for the predominantly USA centered SWMM user base.
=Software Requirements=
| |||