Difference between revisions of "XPSWMM Conversion TUFLOW Boundary Control File (TBC)"
Jump to navigation
Jump to search
| Line 2: | Line 2: | ||
The TUFLOW Boundary Control File (TBC) contains information regarding the location of 2D boundary conditions and internal 1D/2D links within the model. | The TUFLOW Boundary Control File (TBC) contains information regarding the location of 2D boundary conditions and internal 1D/2D links within the model. | ||
<ol> | <ol> | ||
| − | <li> In Windows File Explorer, navigate to the '''TUFLOW\model''' folder and open the TBC using a text editor (Notepad++ is recommended). | + | <li> In Windows File Explorer, navigate to the '''TUFLOW\model''' folder and open the TBC (e.g. '''1D2D_Urban_001.tbc''') using a text editor (Notepad++ is recommended). |
<li> Remove the reference to the 2d_bc points layer. This layer was removed from the model GeoPackage in the <u>[[XPSWMM_Conversion_Export_SWMM_Pipe_Network_Data#Export_1D_EPA_SWMM_Pipe_Network_Data_from_XPSWMM |Export 1D EPA SWMM Pipe Network Data from XPSWMM]]</u> section. | <li> Remove the reference to the 2d_bc points layer. This layer was removed from the model GeoPackage in the <u>[[XPSWMM_Conversion_Export_SWMM_Pipe_Network_Data#Export_1D_EPA_SWMM_Pipe_Network_Data_from_XPSWMM |Export 1D EPA SWMM Pipe Network Data from XPSWMM]]</u> section. | ||
<li> The TBC should reference the 2D boundary condition layer and the 1D/2D connection layer. In this case, they are both included in the 2d_bc lines connections layer so the TBC contains only one command: <br> | <li> The TBC should reference the 2D boundary condition layer and the 1D/2D connection layer. In this case, they are both included in the 2d_bc lines connections layer so the TBC contains only one command: <br> | ||
Revision as of 13:38, 1 March 2024
TUFLOW Boundary Control File (TBC)
The TUFLOW Boundary Control File (TBC) contains information regarding the location of 2D boundary conditions and internal 1D/2D links within the model.
- In Windows File Explorer, navigate to the TUFLOW\model folder and open the TBC (e.g. 1D2D_Urban_001.tbc) using a text editor (Notepad++ is recommended).
- Remove the reference to the 2d_bc points layer. This layer was removed from the model GeoPackage in the Export 1D EPA SWMM Pipe Network Data from XPSWMM section.
- The TBC should reference the 2D boundary condition layer and the 1D/2D connection layer. In this case, they are both included in the 2d_bc lines connections layer so the TBC contains only one command:
Read GIS BC == 1D2D_Urban_001_2d_bc_L ! Reads in 2D inflow/outflow boundaries and links 1D SWMM through embankment culverts to the 2D TUFLOW domain - Save the TBC.
| Up |
|---|
 Continue to Next Step: "TUFLOW Geometry Control File (TGC)"
|
| Up |
|---|
| Back to Main XPSWMM to TUFLOW Conversion Page
|