TUFLOW SWMM Tutorial M02: Difference between revisions

::'''Note:''' In Module 1 we also included '''Project--Options''' in the GeoPackage file. '''Project--Options''' is not required this time as this Tutorial model will use two SWMM INP files. The file created during Module 1 (for the road culverts) and the INP is to be created from this GeoPackage (for the underground pipe network inputs). When TUFLOW processes SWMM inputs, it combines the multiple INP files into one before simulation. As such, the details from the Module 1 '''Project--Options''' input will be used in this tutorial. If '''Project--Options''' are included in multiple Geopackage/INP files, the entry that is referenced lowest in the TUFLOW SWMM Control file (TSCF) will be used.

<li>Click 'Run'.

<li>In Windows File Explorer, navigate to the '''TUFLOW\model\swmm''' folder and drag and drop '''sw02_001.gpkg''' into QGIS.

<li>When prompted by QGIS, under 'Options', tick on 'Add layers to group', then select 'Add Layers' to open all vectors within '''sw02_001.gpkg'''. By default, all items in the available list should have been selected.