Difference between revisions of "TUFLOW Message 3036"

From Tuflow
Jump to navigation Jump to search
 
(One intermediate revision by one other user not shown)
Line 9: Line 9:
  
 
|suggestions=If certain hyteograph records are being scaled with factors greater than one, then consider increasing the original source data for
 
|suggestions=If certain hyteograph records are being scaled with factors greater than one, then consider increasing the original source data for
these hyteographs so that the weighting values can be decreased. <br>Please contact <u>[mailto:support@tuflow.com support@tuflow.com]</u> for further assistance.
+
these hyteographs so that the weighting values can be decreased.  
  
|prelink=[[TUFLOW_Message_3035|Message 3035]]
 
 
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]]
 
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]]
|nextlink=[[TUFLOW_Message_3037|Message 3037]]
 
 
}}
 
}}

Latest revision as of 15:56, 18 July 2024

TUFLOW Message
ERROR 3036 - Hydrograph weight data not in range [0 ... 6.5535].

Alternate Message
NA

Message Type
ERROR

Description
It is possible to apply spatial weighting factors when cells reference nearby hyteograph rainfall data records. In HPC these are discretised as integers, and the original floating point weights must be in range 0 to 6.5535.

Suggestions
If certain hyteograph records are being scaled with factors greater than one, then consider increasing the original source data for these hyteographs so that the weighting values can be decreased.


Up
Go-up.png 3xxx Messages