Check Files 1d hydroprop: Difference between revisions
Content deleted Content added
No edit summary |
No edit summary |
||
Line 12:
| DS_Node_ID||The downstream node ID for the channel.
|-
| Channel_Type||The channel type, see the <u>[https://downloads.tuflow.com/TUFLOW/Releases/Latest/TUFLOW%20Manual.pdf TUFLOW
For example, an '''"S"''' type channel is a standard open channel, an '''"R"''' type channel is a rectangular culvert.
|-
| Manning_n||The primary Manning's n value for the channel. If this varies across the channel, e.g. an open channel with cross-section, the Manning's n value at the lowest point is reported.<br>
For some new structures this is the Cd coefficient.
|-
| Elev_at_Top||The highest elevation in the channel, for an open channel, this is the high point in the cross-section. For a structure the average channel obvert is output (calculated by adding the pipe height to the upstream and downstream invert levels and taking the average). Note that the water level can rise above this. See the
|-
| Depth||The depth of the channel at the top elevation (see above).
Line 39:
The image below shows a hydroprop layer styled by the conveyance attribute.<br>
[[File:Check Files 1d hydroprop 01.jpg]]
<br><br>
{{Tips Navigation
|uplink=[[TUFLOW_Check_Files | TUFLOW Check Files]]
}}
| |||