Difference between revisions of "Check Files 1d xsl"

From Tuflow
Jump to navigation Jump to search
 
Line 17: Line 17:
 
| Elev_at_Top||The elevation at the highest point in the cross-section.
 
| Elev_at_Top||The elevation at the highest point in the cross-section.
 
|-
 
|-
| Depth||The depth at the top of section.  I.e. the Elevation and the top - the elevation at the bed.
+
| Depth||The depth at the top of section.  i.e. the elevation at the top - the elevation at the bed.
 
|-
 
|-
 
| Top_Flow_Width||The flow width at the top of the cross section.
 
| Top_Flow_Width||The flow width at the top of the cross section.
Line 33: Line 33:
 
| Source_Layer||The GIS file that the cross-section was specified in.
 
| Source_Layer||The GIS file that the cross-section was specified in.
 
|}
 
|}
 +
 +
 +
{{Tips Navigation
 +
|uplink=[[TUFLOW_Check_Files | TUFLOW Check Files]]
 +
}}

Latest revision as of 15:28, 19 August 2024

The XSL check file contains information on the input cross-sections where specified as tabular data (as opposed to say a box culvert section which is defined by a height and a width). At each input cross-section a GIS line is output containing the information in the table below.
The .csv 1d_ta_tables check file contains the height varying properties for the section.
The 1d_hydroprop check files which contains information on each of the channels (including interpolated and structures).

Attributes of xsl_check

Attribute Name Attribute Description
ID The cross-section ID, this is the input cross-section number and is unique. It is also output in the 1d_ta_tables check file.
Manning_n The Manning's n at the lowest point (bed) in the cross-section. If no roughness value is specified on the cross-section (the Manning's value is specified on the channel), then a value of -1 is output.
Elev_at_Bed The elevation at the lowest point in the cross-section.
Elev_at_Top The elevation at the highest point in the cross-section.
Depth The depth at the top of section. i.e. the elevation at the top - the elevation at the bed.
Top_Flow_Width The flow width at the top of the cross section.
Top_Storage_Width The storage width at the top of the cross-section.
Top_Flow_Area The flow area at the top of the cross-section.
Top_Wet_Perimeter The wetted perimeter at the top of the cross-section.
Source_File The source file (.csv) file which the data was read from.
Attributes The remaining attributes (the source file is excluded, see the above) in the GIS layer.
Source_Layer The GIS file that the cross-section was specified in.


Up
Go-up.png TUFLOW Check Files