Difference between revisions of "TUFLOW Message 3003"
Jump to navigation
Jump to search
| (3 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
{{TUFLOW_Message | {{TUFLOW_Message | ||
| − | |tuflow_message=ERROR 3003 | + | |tuflow_message=ERROR 3003 - nDevices requested, "a", exceeds nCudaDevices. |
| − | <br> | + | |alt_msg=NA<br> |
| − | |||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc=The number of requested GPU devices exceeds the number of usable GPU devices | + | |message_desc=This error message has been deprecated. If you are still receiving this message with the latest TUFLOW release, please contact [mailto:support@tuflow.com support@tuflow.com].<br> |
| − | |suggestions=Ensure that enough GPU devices are available for modelling.<br> Use "GPU | + | The number of requested GPU devices exceeds the number of usable GPU devices. |
| + | |suggestions=Ensure that enough GPU devices are available for modelling.<br> Use the '<tt><font color="blue">GPU Devices IDs</font></tt>' TCF command or '<tt>-pu</tt>' batch run switch to control the number of requested GPU devices. ID numbering starts at 0 for GPU devices. | ||
Note the batch switch will override the tcf command if both are used. | Note the batch switch will override the tcf command if both are used. | ||
| − | |||
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] | |uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] | ||
| − | |||
}} | }} | ||
Latest revision as of 13:22, 9 September 2024
TUFLOW Message
ERROR 3003 - nDevices requested, "a", exceeds nCudaDevices.
Alternate Message
NA
Message Type
ERROR
Description
This error message has been deprecated. If you are still receiving this message with the latest TUFLOW release, please contact support@tuflow.com.
The number of requested GPU devices exceeds the number of usable GPU devices.
Suggestions
Ensure that enough GPU devices are available for modelling.
Use the 'GPU Devices IDs' TCF command or '-pu' batch run switch to control the number of requested GPU devices. ID numbering starts at 0 for GPU devices.
Note the batch switch will override the tcf command if both are used.
| Up |
|---|
 3xxx Messages
|