Difference between revisions of "TUFLOW Message 2589"

From Tuflow
Jump to navigation Jump to search
(Created page with "{{TUFLOW_Message |tuflow_message=ERROR 2589 - Less than 5 attributes for SA RF layer, file: <filename> |alt_msg=ERROR 2589 - Less than 5 attributes for SA RF layer, file: <fil...")
 
 
(One intermediate revision by one other user not shown)
Line 3: Line 3:
 
|alt_msg=ERROR 2589 - Less than 5 attributes for SA RF layer, file: <filename>. File appears to be a 2d_sa file and not a 2d_sa_rf.
 
|alt_msg=ERROR 2589 - Less than 5 attributes for SA RF layer, file: <filename>. File appears to be a 2d_sa file and not a 2d_sa_rf.
 
|type=[[ERROR]]
 
|type=[[ERROR]]
|message_desc=TUFLOW is expecting 5 attributes for a 2d_sa_rf layer, as listed in Table 7-6 of the [https://downloads.tuflow.com/_archive/TUFLOW/Releases/2018-03/TUFLOW%20Manual.2018-03.pdf|2018 TUFLOW Manual.].  
+
|message_desc=TUFLOW is expecting 5 attributes for a 2d_sa_rf layer, as listed in the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u>.  
 
|suggestions=Please check the 2d_sa_rf layer attributes. If required, import a new 2d_sa_rf empty file to ensure all attribute are present.
 
|suggestions=Please check the 2d_sa_rf layer attributes. If required, import a new 2d_sa_rf empty file to ensure all attribute are present.
 
<br>Check that the correct layer and command has been used noting they are different for a 2d_sa_rf and a 2d_sa.  
 
<br>Check that the correct layer and command has been used noting they are different for a 2d_sa_rf and a 2d_sa.  

Latest revision as of 09:26, 23 September 2024

TUFLOW Message
ERROR 2589 - Less than 5 attributes for SA RF layer, file: <filename>

Alternate Message
ERROR 2589 - Less than 5 attributes for SA RF layer, file: <filename>. File appears to be a 2d_sa file and not a 2d_sa_rf.

Message Type
ERROR

Description
TUFLOW is expecting 5 attributes for a 2d_sa_rf layer, as listed in the TUFLOW Manual.

Suggestions
Please check the 2d_sa_rf layer attributes. If required, import a new 2d_sa_rf empty file to ensure all attribute are present.
Check that the correct layer and command has been used noting they are different for a 2d_sa_rf and a 2d_sa.


Up
Go-up.png 2xxx Messages