Difference between revisions of "TUFLOW Message 2025"

From Tuflow
Jump to navigation Jump to search
 
(One intermediate revision by one other user not shown)
Line 4: Line 4:
 
|type=[[ERROR]]
 
|type=[[ERROR]]
 
|message_desc=Incompatible Flags set for 1D/2D Interface (2D HX) boundary.
 
|message_desc=Incompatible Flags set for 1D/2D Interface (2D HX) boundary.
|suggestions=Valid flags for a HX type boundary are outlined in Table 4.33 [2D Boundary Conditions (2d_bc) Attribute Descriptions] in the 2010 TUFLOW manual.  Ensure that only valid flags are used.
+
|suggestions=Valid flags for a HX type boundary are outlined in the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u>.  Ensure that only valid flags are used.
 +
 
  
|prelink=[[TUFLOW_Message_2024|Message 2024]]
 
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
|nextlink=[[TUFLOW_Message_2026|Message 2026]]
 
 
}}
 
}}

Latest revision as of 09:27, 23 September 2024

TUFLOW Message
ERROR 2025 - Incompatible Flags set for 2D HX boundary.

Alternate Message
NA

Message Type
ERROR

Description
Incompatible Flags set for 1D/2D Interface (2D HX) boundary.

Suggestions
Valid flags for a HX type boundary are outlined in the TUFLOW Manual. Ensure that only valid flags are used.


Up
Go-up.png 2xxx Messages