Difference between revisions of "TUFLOW Message 1203"

From Tuflow
Jump to navigation Jump to search
 
(2 intermediate revisions by one other user not shown)
Line 9: Line 9:
 
*SXG<br>
 
*SXG<br>
 
*SXS<br>
 
*SXS<br>
−
For a detalied description of these options see Section 4.5.1.3 (Connecting Pits and Nodes to 2D Domains) and Table 4.14 (1D model Network (1d_nwk) Attribute Descriptions) of the TUFLOW manual (2010 version).
+
For a detalied description of these options, refer to the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u>.
 
|suggestions=Specify a valid attribute as per the list above.
 
|suggestions=Specify a valid attribute as per the list above.
−
|discussion_page=* [[Talk:TUFLOW Message 1203|Discuss Message 1203]]
+
 
−
|link3=''
+
 
−
|link4=''
 
−
|prelink=[[TUFLOW_Message_1202|Message 1202]]
 
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
−
|nextlink=[[TUFLOW_Message_1204|Message 1204]]
 
 
}}
 
}}

Latest revision as of 09:44, 23 September 2024

TUFLOW Message
ERROR 1203 - Invalid Conn_2D attribute at node. Cannot exceed 3 characters.

Alternate Message
NA

Message Type
ERROR

Description
An illegal Conn_2D attribute has been inputted on a 1d pit or node object. The Conn_2D attribute is used to automatically link to the 2D. Valid options are available:

  • SX
  • SXL
  • SXZ
  • SXG
  • SXS

For a detalied description of these options, refer to the TUFLOW Manual.

Suggestions
Specify a valid attribute as per the list above.


Up
Go-up.png 1xxx Messages
Retrieved from "https://wiki.tuflow.com/w/index.php?title=TUFLOW_Message_1203&oldid=40854"