Difference between revisions of "TUFLOW Message 1998"
Jump to navigation
Jump to search
| (5 intermediate revisions by 2 users not shown) | |||
| Line 3: | Line 3: | ||
|alt_msg=N/A | |alt_msg=N/A | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc=The water level in a 1D node has exceeded the instability water level for the node. The default instability water level is 10 times the maximum depth in the Nodal Area table. This can be modified with the .ecf command: | + | |message_desc=The water level in a 1D node has exceeded the instability water level for the node. The default instability water level is 10 times the maximum depth in the Nodal Area table. This can be modified with the .ecf command: <tt><font color="blue">Depth Limit Factor </font><font color="red">==</font></tt>. This can occur if the 1D node fluctuates widely due to stability issues and may result in a NaN (not a number). |
| − | |suggestions=Please refer to | + | |suggestions=Please refer to the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u> for tips on finding the start of an instability. |
| − | + | ||
| − | + | ||
| − | |||
| − | |||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
| − | |||
}} | }} | ||
Latest revision as of 09:46, 23 September 2024
TUFLOW Message
ERROR 1998 - Water level of <water level> exceeds range in Node <node ID> at
Alternate Message
N/A
Message Type
ERROR
Description
The water level in a 1D node has exceeded the instability water level for the node. The default instability water level is 10 times the maximum depth in the Nodal Area table. This can be modified with the .ecf command: Depth Limit Factor ==. This can occur if the 1D node fluctuates widely due to stability issues and may result in a NaN (not a number).
Suggestions
Please refer to the TUFLOW Manual for tips on finding the start of an instability.
| Up |
|---|
 1xxx Messages
|