TUFLOW Message 1208: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
|alt_msg=NA |
|alt_msg=NA |
||
|type=[[ERROR]] |
|type=[[ERROR]] |
||
|message_desc=An error has occurred whilst reading |
|message_desc=An error has occurred whilst reading 1D network data (1d_nwk). Check that the attributes of the layer match those listed in the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u>. An empty 1d_nwk file is written with the <tt><font color="blue">Write Empty GIS Files </font><font color="red">== </font></tt> tcf command. |
||
|suggestions=Ensure the layer has the correct attributes and ensure that the <tt><font color="blue">Read GIS Network </font><font color="red">== </font></tt> is only for used for network data and not other 1D GIS data. Other data types have use a specific GIS command. For example:<br> |
|suggestions=Ensure the layer has the correct attributes and ensure that the <tt><font color="blue">Read GIS Network </font><font color="red">== </font></tt> is only for used for network data and not other 1D GIS data. Other data types have use a specific GIS command. For example:<br> |
||
* 1d boundary (<tt><font color="blue">Read GIS BC </font><font color="red">== </font></tt>) |
* 1d boundary (<tt><font color="blue">Read GIS BC </font><font color="red">== </font></tt>) |
||
Latest revision as of 09:54, 23 September 2024
TUFLOW Message
ERROR 1208 - Reading node network data. Check 1d_nwk layer has correct attributes.
Alternate Message
NA
Message Type
ERROR
Description
An error has occurred whilst reading 1D network data (1d_nwk). Check that the attributes of the layer match those listed in the TUFLOW Manual. An empty 1d_nwk file is written with the Write Empty GIS Files == tcf command.
Suggestions
Ensure the layer has the correct attributes and ensure that the Read GIS Network == is only for used for network data and not other 1D GIS data. Other data types have use a specific GIS command. For example:
- 1d boundary (Read GIS BC == )
- Tabular data links such as cross-sections or nodal area tables (Read GIS Table Links == )
- Manholes (Read GIS Manhole == )
- Initial Water level (Read GIS IWL == )
- Water level lines (Read GIS WLL == )
- WLL points (Read GIS WLL Points == )
| Up |
|---|
 1xxx Messages
|