Difference between revisions of "TUFLOW Message 2508"

From Tuflow
Jump to navigation Jump to search
 
(4 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
{{TUFLOW_Message
 
{{TUFLOW_Message
|tuflow_message=WARNING 2508 - Soil initial moisture is greater than porosity, soil capacity is zero.<br>
+
|tuflow_message=WARNING 2508 - Soil initial moisture is greater than porosity, soil capacity is zero. No infiltration will occur for this soil type.
No infiltraion will occur for this soil type.
 
 
|alt_msg=NA
 
|alt_msg=NA
 
|type=[[WARNING]]
 
|type=[[WARNING]]
|message_desc=The soil capacity is calculated as porosity minus the soil initial moisture.  For example a "Sandy Loam" soil has a default porosity of 0.412 and therefore, a maximum soil moisture of 0.412.  If a value of 0.412 or higher is set the soil capacity is set to zero and no infiltration will occur for the soil type.
+
|message_desc=The soil capacity is calculated as porosity minus the soil initial moisture.  For example, when using the Green-Ampt approach, a "Sandy Loam" soil has a default porosity of 0.412, which translates to a maximum soil moisture of 0.412.  If a value of 0.412 or higher is set, the soil capacity is set to zero and no infiltration will occur for the soil type.
|suggestions=Check that the soil initial moisture is being specified correctly and that no infiltration is desired.
+
|suggestions=Check that the soil initial moisture is being specified correctly and that no infiltration is desired. <br>
|discussion_page=* [[Talk:TUFLOW Message 2508|Discuss Message 2508]]
+
Refer to the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u> for more information on infiltration.
|link3=''
+
 
|link4=''
 
|prelink=[[TUFLOW_Message_2507|Message 2507]]
 
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
|nextlink=[[TUFLOW_Message_2509|Message 2509]]
 
 
}}
 
}}

Latest revision as of 13:56, 7 October 2024

TUFLOW Message
WARNING 2508 - Soil initial moisture is greater than porosity, soil capacity is zero. No infiltration will occur for this soil type.

Alternate Message
NA

Message Type
WARNING

Description
The soil capacity is calculated as porosity minus the soil initial moisture. For example, when using the Green-Ampt approach, a "Sandy Loam" soil has a default porosity of 0.412, which translates to a maximum soil moisture of 0.412. If a value of 0.412 or higher is set, the soil capacity is set to zero and no infiltration will occur for the soil type.

Suggestions
Check that the soil initial moisture is being specified correctly and that no infiltration is desired.
Refer to the TUFLOW Manual for more information on infiltration.


Up
Go-up.png 2xxx Messages