Tuflow

TUFLOW Message 2594: Difference between revisions

Browse history interactively
Content deleted Content added
VisualWikitext
Created page with "{{TUFLOW_Message |tuflow_message=WARNING 2594 - For soil ID [n] soil type is not "CO" required for soil layers > 1 |alt_msg=NA |type=ERROR |message_desc=Soil layers that a..."
 
No edit summary
 
Line 1:
{{TUFLOW_Message
|tuflow_message=WARNINGERROR 2594 - For soil ID [n]"<>" soil type is not "CO" required for soil layers > 1
|alt_msg=NA
|type=[[ERROR]]
|message_desc=Soil layers that are not the top most layer must use the 'CO' type within the TSOILF.
|suggestions=Make sureEnsure any soil layers definedspecified using the TGC command(s) "<tt><font color="blue">Set Soil Layer N </font><font color="red">==</font></tt> " or "<tt><font color="blue">Read GIS Soil Layer N </font><font color="red">= =</font></tt>" or "<tt><font color="blue">Read GRID Soil Layer N </font><font color="red">= =</font></tt>", (where N is a number with a value of 2 or more), are referencing soil ID's of 'CO' type. are not referencing soil IDs that are not a 'CO' type. <br>
Refer to the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u> for more information.<br>
 
'''Note:''' There is a known bug in the 2023-03 release (pre 2023-03-AF build). thatIt causedcauses soil layers that hadhave an 'Initial Moisture' parameter in the TSOILF that is greater than or equal to the soil porosity to change the soil type to 'NONE'. whichThis could cause this error to trigger. (searchTo theavoid TLF for "WARNING 2508" to confirm).this, Eithereither upgrade to the 2023-03-AF build (or more recent), or check the initial moisture parameter in the TSOILF is less than the soil porosity value.
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
Retrieved from "https://wiki.tuflow.com/TUFLOW_Message_2594"