Check Files 2d DEM Z

This raster file contains the final elevations in the model, it includes both 2D areas of the model and also 1D sections which utilise the 1D Water Level Line (1D mapping) functionality. When using SGS, the this file contains a raster based on the SGS elevations used for the depth output interpolation (based on the SGS Depth Output == command).

Output grid formats currently supported by TUFLOW include the GeoTIFF grids (.tif), binary grids (.flt) and ESRI ASCII grid format (.asc). The TCF command Grid Format == TIF or Grid Format == FLT or Grid Format == ASC can be used to set the preferred output format. The default output format is TIF. The asc_to_asc utility can be used to convert between ASC and TIF (in both directions).

All of these formats are widely recognised (QGIS, MapInfo, ArcMap, SMS etc). The cell size of the DEM_Z check file (and all raster outputs from TUFLOW) can be set with the TCF command:
Grid Output Cell Size == <cell size in metres or feet>
This raster is a north-south aligned raster and so minor interpolation is required to display the TUFLOW model on this grid. To view the exact values at each point the 2d_zpt check file can be used. The _zpt_check file is more suited to viewing the values at individual zpts.

The DEM_Z check file can be styled in your GIS software and you can also perform grid calculation between simulations. For example when performing a flood impact assessment, the final elevation for the developed case can be compared to the existing case, to check the areas of cut and fill.
In the image below the DEM_Z check file is shown for the FMA Challenge Model 2 (this model can be downloaded and simulated at a range of cell sizes without a licence). It can be seen that it is easy to visualise the final elevations across the entire model to detect any anomalies.

Up
TUFLOW Check Files