Difference between revisions of "TUFLOW Message 2835"
Jump to navigation
Jump to search
| Line 7: | Line 7: | ||
|message_desc=Not expecting point / line / region for BC type: "<>". A point / line / region is not valid for the boundary condition (BC) type "<>". | |message_desc=Not expecting point / line / region for BC type: "<>". A point / line / region is not valid for the boundary condition (BC) type "<>". | ||
<br> | <br> | ||
| − | From the 2023-03 release, a point-type QT boundary is not supported when using Quadtree. | + | From the 2023-03 release, a point-type QT boundary is not supported when using TUFLOW Classic / HPC (bringing the behaviour in line with Quadtree). |
|suggestions=*Refer to the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u> for information on the BC type "<>" and its specifications. | |suggestions=*Refer to the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u> for information on the BC type "<>" and its specifications. | ||
*If a QT point was used as an internal inflow boundary before the 2023-03 release, transitioning to a 2d_sa setup is recommended. For an external boundary, the preferred approach is to use a 2d_bc QT line snapped to the code polygon. | *If a QT point was used as an internal inflow boundary before the 2023-03 release, transitioning to a 2d_sa setup is recommended. For an external boundary, the preferred approach is to use a 2d_bc QT line snapped to the code polygon. | ||
Revision as of 17:12, 7 February 2025
TUFLOW Message
ERROR 2835 - Not expecting point for bc type: "<>".
Alternate Message
ERROR 2835 - Not expecting line for bc type: "<>".
ERROR 2835 - Not expecting region for bc type: "<>".
Message Type
ERROR
Description
Not expecting point / line / region for BC type: "<>". A point / line / region is not valid for the boundary condition (BC) type "<>".
From the 2023-03 release, a point-type QT boundary is not supported when using TUFLOW Classic / HPC (bringing the behaviour in line with Quadtree).
Suggestions
- Refer to the TUFLOW Manual for information on the BC type "<>" and its specifications.
- If a QT point was used as an internal inflow boundary before the 2023-03 release, transitioning to a 2d_sa setup is recommended. For an external boundary, the preferred approach is to use a 2d_bc QT line snapped to the code polygon.
| Up |
|---|
 2xxx Messages
|