Difference between revisions of "TUFLOW Message 0637"
Jump to navigation
Jump to search
Ellis Symons (talk | contribs) |
Ellis Symons (talk | contribs) |
||
| Line 4: | Line 4: | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc=When using a NetCDF grid as an input for Zpts, Mat, Soil, etc then it should be treated as a database (similar to GPKG) and it requires the format "<tt>file.nc >> layer_name</tt>". This error suggests that the line contains only a single ">" rather than two of them ">>" | + | |message_desc=When using a NetCDF grid as an input for Zpts, Mat, Soil, etc then it should be treated as a database (similar to GPKG) and it requires the format "<tt>file.nc >> layer_name</tt>". This error suggests that the line contains only a single ">" rather than two of them ">>". |
|suggestions=Double check the referenced command to ensure it's using a double ">>". | |suggestions=Double check the referenced command to ensure it's using a double ">>". | ||
Latest revision as of 23:02, 27 May 2025
TUFLOW Message
ERROR 0637 - netcdf must use double ">" to reference layers: <>.
Alternate Message
NA
Message Type
ERROR
Description
When using a NetCDF grid as an input for Zpts, Mat, Soil, etc then it should be treated as a database (similar to GPKG) and it requires the format "file.nc >> layer_name". This error suggests that the line contains only a single ">" rather than two of them ">>".
Suggestions
Double check the referenced command to ensure it's using a double ">>".
| Up |
|---|
 0xxx Messages
|