TUFLOW Message 0640: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
No edit summary |
Ellis Symons (talk | contribs) No edit summary |
||
| Line 4: | Line 4: | ||
|type=[[ERROR]] |
|type=[[ERROR]] |
||
|message_desc=This error will trigger if more than 100 grids are opened concurrently by TUFLOW (for reading or writing). This error should never be triggered as there are very few processes (if any) within TUFLOW that read or write grids concurrently. |
|||
|message_desc=Cannot have more than "<>" GRID layers open at once. |
|||
|suggestions= |
|suggestions=If your model is triggering this error, it is most likely caused by grids not being closed properly by TUFLOW (caused by an internal logic error). If this is the case, please contact [mailto:support@tuflow.com support@tuflow.com]. |
||
Latest revision as of 20:38, 28 May 2025
TUFLOW Message
ERROR 0640 - Cannot have more than "<>" GRID layers open at once.
Alternate Message
NA
Message Type
ERROR
Description
This error will trigger if more than 100 grids are opened concurrently by TUFLOW (for reading or writing). This error should never be triggered as there are very few processes (if any) within TUFLOW that read or write grids concurrently.
Suggestions
If your model is triggering this error, it is most likely caused by grids not being closed properly by TUFLOW (caused by an internal logic error). If this is the case, please contact support@tuflow.com.
| Up |
|---|
 0xxx Messages
|