TUFLOW Message 3002: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
No edit summary |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 9: | Line 9: | ||
|suggestions= |
|suggestions= |
||
* Check that the ptx files (there should be four of them) are in the same directory as the TUFLOW executable. |
* Check that the ptx files (there should be four of them) are in the same directory as the TUFLOW executable. If needed, download the release again from the website. |
||
* |
* Upgrade to the latest NVidia drivers for your system from the NVIDIA website. |
||
*Download the TUFLOW release again and use it to re-run the simulation. |
|||
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] |
|uplink=[[3xxx_TUFLOW_Messages|3xxx Messages]] |
||
Latest revision as of 11:01, 18 June 2025
TUFLOW Message
ERROR 3002 - Non-CUDA_SUCCESS code returned ERROR 3002: Check that you have the correct NVIDIA driver installed
Alternate Message
ERROR 3002 - HPC has reported an error - see .hpc.tlf
Message Type
ERROR
Description
The GPU driver appears to be installed, but one of the following has occurred:
- The GPU driver failed to initialise.
- A compute context could not be created on the selected device.
- The ptx code could not be compiled for the selected device.
Suggestions
- Check that the ptx files (there should be four of them) are in the same directory as the TUFLOW executable. If needed, download the release again from the website.
- Upgrade to the latest NVidia drivers for your system from the NVIDIA website.
| Up |
|---|
 3xxx Messages
|