TUFLOW CATCH Tutorial M04: Difference between revisions
Content deleted Content added
Created page with "= Introduction = In this module, a TUFLOW CATCH integrated model with interventions is developed. <br> TUFLOW CATCH Tutorial 04 is built from the models created in <u>TUFLO..." |
|||
Line 179:
<tt><font color=blue>Sediment Control File</font><font color=red> == </font>..\..\TUFLOWFV\stm\TC04_001.fvsed <font color=green> ! Reference the Sediment Control File</font></tt><br>
<li> In the 'Initial Conditions' section, update the following commands to set the initial temperature, salinity, sediment concentration and
<tt><font color=blue>Initial Temperature</font><font color=red> == </font>17.0 <font color=green> ! Specify initial temperature (degrees Celsius)</font></tt><br>
<tt><font color=blue>Initial Salinity</font><font color=red> == </font>0.0 <font color=green> ! Specify initial salinity (psu)</font></tt><br>
<tt><font color=blue>Initial Sediment Concentration</font><font color=red> == </font>20 <font color=green> ! Specify initial suspended sediment concentration for clay (mg/L)</font></tt><br>
<tt><font color=blue>Initial WQ Concentrations</font><font color=red> == </font>8.0, 1e6, 1e6 <font color=green> ! Specify initial water quality concentration for dissolved oxygen, alive and dead E. coli</font></tt><br>
<li>In the 'Meteorology' section, add the following boundary condition blocks to specify meteorological conditions. The variable '<tt>met_ts</tt>' is used to define the location of the meteorological data. <br>
| |||