Flood Modeller Tutorial Module02 Provisional: Difference between revisions
Content deleted Content added
Line 64:
=Modify Simulation Control Files=
With the input GIS layers
At this stage, check the following changes have been made to the geometry:
*Two layers are created to form a 3D TIN representing changes to the ground elevations.
*Two 2d_mat layers are created to represent changes to the land use at the location of the proposed development.
Next, the TGC is updated as described below:<ol>
<li>Begin by opening <b>FMT_M01_001.tgc</b> in the text editor. Save the file as <b>FMT_M02_001.tgc</b>.
<li> Open <b>FMT_M02_001.tgc</b>.
Line 86:
<li> Save the file. The TGC file is now ready to be used.</ol>
==ESTRY Control File (ECF)==
There have been three changes to the model that impact the ECF file:
*We have created a 1d_nwk layer representing the culverts of the proposed pipe network
Line 127:
<li> Save the file. The TBC is now ready to be used.</ol>
==TUFLOW Control File (TCF)==
We will need to create a new tcf file that references the new tgc, ecf and tbc files.
Line 189:
'''Review Flood Modeller/ESTRY 1D/1D Links'''
The successful connection of the Flood Modeller and ESTRY networks can be checked by the presence of CHECK 1393
=Review the Results=
| |||