Flood Modeller Tutorial Module02 Provisional: Difference between revisions

*Two 2d_mat layers are created to represent changes to the land use at the location of the proposed development.

Next, the TGC is updated as described below:<ol>

<li> Open <b>FMT_M02_001.tgc</b>.

<li>We will now add the commands to modify the topography to represent the proposed development. Add the following commands after the READ GIS Z Shape line:

 

<ol>

<li> Open <b>FMT_M02_001.ecf</b><br>

<li> Add the following commands at the bottom of the file as follows:

Next, update the TBC to include a 2d_sa layer that defines inflows into the pipe network.

<ol>

<li>Insert the following commands after the existing <font color="blue"><tt>Read GIS SA</tt></font><font color="red"><tt> ==</tt></font> mi\2d_sa_M01_002_R.SHP command:<br>

<u>'''QGIS - SHP'''</u><br>