Revision as of 11:14, 13 November 2025 view source Abrar.Alttahir (talk \| contribs) Bureaucrats, Administrators 352 edits →How can a flow splitter with a nib wall be modelled? Tag: Visual edit ← Older edit		Latest revision as of 12:16, 13 November 2025 view source Abrar.Alttahir (talk \| contribs) Bureaucrats, Administrators 352 edits →How can a flow splitter with a nib wall be modelled?
Line 268: <span style="color:red; font-weight:bold;">UNDER CONSTRUCTION</span> A flow splitter with a nib wall can be modelled ~~in TUFLOW~~ by introducing a 1D weir between the manhole and the relevant outlet pipe. The weir crest elevation should be set equal to the height of the nib wall within the chamber. This setup allows low flows to discharge through one pipe, while higher flows overtop the weir into a secondary outlet, replicating the behaviour of a physical flow splitter. The main outlet pipes are connected through a manhole, which automatically applies appropriate entry and exit losses. For outlets that do not connect further downstream, entry and exit losses should be manually defined in the attributes. Refer to the schematic example below for this configuration. <ol> [[File:Manhole flow splitter topview.png\|alt=\|300x300px]] </ol> <br>

TUFLOW 1D Channels and Hydraulic Structures: Difference between revisions