Tuflow

TUFLOW Message 1401: Difference between revisions

Browse history interactively
← Older editNewer edit →
Content deleted Content added
VisualWikitext
No edit summary
No edit summary
Line 1:
{{TUFLOW_Message
|tuflow_message=CHECK 1401 - <x number> culvert(s) not used for determining losses at Manhole <Manhole ID>
|tuflow_message=ERROR 1401 - Cannot connect Node with a X1DH or X1DQ link as the node is already connected to an external 1D domain via a X1DH or X1DQ link.
|alt_msg=NA
|type=[[ERRORCHECK]]
|message_desc=When applying the Engelhund loss approach for manholes (see Section 4.5.2 of the 2010 TUFLOW manual), if an incoming culvert enters above the obvert of the highest outlet, the culvert is not included in the manhole loss calculations. See also point 48(b) in the [http://www.tuflow.com/Download/TUFLOW/Releases/2012-05/Doc/TUFLOW%20Release%20Notes.2011-09%20and%202012-05.pdf release notes].
|message_desc=A TUFLOW 1D (ESTRY) node is trying to be connected to an external 1D scheme using a X1DH or X1DQ link as indicated in the message, but the TUFLOW node is already connected to an external 1D node using a link as indicated in the message. Only one external 1D scheme link can be specified for a TUFLOW (ESTRY) node.
|suggestions=Review connectionsthe toinverts externalon 1Dthe schemeculverts. for thisA nodepoint andobject removein a "1d_mh" layer can be used to set the inappropriateloss approach at each one(s)manhole.
|discussion_page=* [[Talk:TUFLOW Message 13821401|Discuss Message 13821401]]
|link3=''
|link4=''
|prelink=[[TUFLOW_Message_1394|Message 1394]]
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
|nextlink=[[TUFLOW_Message_1991TUFLOW_Message_1402|Message 19911402]]
}}
Retrieved from "https://wiki.tuflow.com/TUFLOW_Message_1401"