Difference between revisions of "TUFLOW Message 2070"
Jump to navigation
Jump to search
Steph.dufour (talk | contribs) |
|||
| Line 4: | Line 4: | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
|message_desc=Same rainfall gauge applied to 2D cell more than once. | |message_desc=Same rainfall gauge applied to 2D cell more than once. | ||
| − | |suggestions= | + | |suggestions=This error will be outputted if the .tcf command '''Rainfall Gauges''' has been set to '''One per Cell''' (as opposed to the default of '''Unlimited per Cell'''). The message tells the user that more than one RF input (from overlapping RF polygons) has been assigned to an individual cell. This is a good quality control check to prevent duplication of rainfall on a cell. |
|discussion_page=* [[Talk:TUFLOW Message 2070|Discuss Message 2070]] | |discussion_page=* [[Talk:TUFLOW Message 2070|Discuss Message 2070]] | ||
|link3='' | |link3='' | ||
Revision as of 14:00, 17 February 2015
TUFLOW Message
ERROR 2070 - More than one rainfall gauge applied to 2D cell.
Alternate Message
ERROR 2070 - Same rainfall gauge applied to 2D cell more than once.
Message Type
ERROR
Description
Same rainfall gauge applied to 2D cell more than once.
Suggestions
This error will be outputted if the .tcf command Rainfall Gauges has been set to One per Cell (as opposed to the default of Unlimited per Cell). The message tells the user that more than one RF input (from overlapping RF polygons) has been assigned to an individual cell. This is a good quality control check to prevent duplication of rainfall on a cell.
| Up |
|---|
 2xxx Messages
|