Difference between revisions of "TUFLOW Message 0120"

From Tuflow
Jump to navigation Jump to search
(Created page with '{{TUFLOW_Message |tuflow_message=ERROR 0120 - Could not find ",a," in database ",a, |alt_msg=NA |type=ERROR |message_desc=???? |suggestions=???? |discussion_page=* [[Talk:TUF...')
 
Line 3: Line 3:
 
|alt_msg=NA
 
|alt_msg=NA
 
|type=[[ERROR]]
 
|type=[[ERROR]]
|message_desc=????
+
|message_desc= The boundary condition ID in GIS 2d_bc file could not be found in the boundary condition database csv file.
|suggestions=????
+
|suggestions= Check the names in the 2d_bc file and the bcdbase.csv are consistent. <br>
 +
This error is common if a user has mistakenly used either a 2d_bc template file in combination with the command "Read GIS SA =="; or the 2d_sa template file in combination with the Read GIS BC == command. Check that the correct template file is matched with the correct command. 2d_sa should be used with Read GIS SA ==, 2d_bc should be used with Read GIS BC ==.
 
|discussion_page=* [[Talk:TUFLOW Message 0120|Discuss Message 0120]]
 
|discussion_page=* [[Talk:TUFLOW Message 0120|Discuss Message 0120]]
 
|link3=''
 
|link3=''

Revision as of 06:52, 2 September 2015

TUFLOW Message
ERROR 0120 - Could not find ",a," in database ",a,

Alternate Message
NA

Message Type
ERROR

Description
The boundary condition ID in GIS 2d_bc file could not be found in the boundary condition database csv file.

Suggestions
Check the names in the 2d_bc file and the bcdbase.csv are consistent.
This error is common if a user has mistakenly used either a 2d_bc template file in combination with the command "Read GIS SA =="; or the 2d_sa template file in combination with the Read GIS BC == command. Check that the correct template file is matched with the correct command. 2d_sa should be used with Read GIS SA ==, 2d_bc should be used with Read GIS BC ==.


Up
Go-up.png 0xxx Messages