Difference between revisions of "TUFLOW Message 2618"
Jump to navigation
Jump to search
(Created page with "{{TUFLOW_Message |tuflow_message=WARNING 2618 - F1 rainfall factor of 0 set to 1. RF Name: <name> |alt_msg=WARNING 2618 - F2 rainfall factor of 0 set to 1. RF Name: <name> |ty...") |
(No difference)
|
Revision as of 09:06, 15 January 2016
TUFLOW Message
WARNING 2618 - F1 rainfall factor of 0 set to 1. RF Name: <name>
Alternate Message
WARNING 2618 - F2 rainfall factor of 0 set to 1. RF Name: <name>
Message Type
WARNING
Description
The F1 or F2 attribute in the GIS table for the rainfall point layer has not been set and is zero (or less). These factors are applied as a multiplier on the rainfall boundary.
Suggestions
It is recommended that if no rainfall factor is desired that these are set to 1 for clarity. A value of 1 has overwritten the specified value of 0.
| Up |
|---|
 2xxx Messages
|