Difference between revisions of "TUFLOW Message 1999"
Jump to navigation
Jump to search
(Created page with "{{TUFLOW_Message |tuflow_message=ERROR 1998 - Water level of <water level> exceeds range in Channel <channel ID> at <time>. |alt_msg=N/A |type=ERROR |message_desc=The wate...") |
|||
| (4 intermediate revisions by one other user not shown) | |||
| Line 3: | Line 3: | ||
|alt_msg=N/A | |alt_msg=N/A | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc=The water level in a 1D channel has exceeded the instability water level for the channel. The default instability water level is 10 times the maximum depth in the cross-section for the channel. This can be modified with the .ecf command: | + | |message_desc=The water level in a 1D channel has exceeded the instability water level for the channel. The default instability water level is 10 times the maximum depth in the cross-section for the channel. This can be modified with the .ecf command: <tt><font color="blue">Depth Limit Factor </font><font color="red">== </font></tt>. This can occur if the 1D water level fluctuates widely due to stability issues and may result in a NaN (not a number). |
| − | |suggestions=Please refer to | + | |suggestions=Please refer to the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u> for tips on finding the start of an instability. |
| − | + | ||
| − | |||
| − | |||
| − | |||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
| − | |||
}} | }} | ||
Latest revision as of 09:47, 23 September 2024
TUFLOW Message
ERROR 1998 - Water level of <water level> exceeds range in Channel <channel ID> at
Alternate Message
N/A
Message Type
ERROR
Description
The water level in a 1D channel has exceeded the instability water level for the channel. The default instability water level is 10 times the maximum depth in the cross-section for the channel. This can be modified with the .ecf command: Depth Limit Factor == . This can occur if the 1D water level fluctuates widely due to stability issues and may result in a NaN (not a number).
Suggestions
Please refer to the TUFLOW Manual for tips on finding the start of an instability.
| Up |
|---|
 1xxx Messages
|