Tuflow

TUFLOW Message 1056: Difference between revisions

Browse history interactively
← Older edit
Content deleted Content added
VisualWikitext
No edit summary
No edit summary
 
(4 intermediate revisions by 2 users not shown)
Line 3:
|alt_msg=ERROR 1056 - Incompatible flags "F" and "N" specified for CS data ",a," in ",a,
|type=[[ERROR]]
|message_desc='''"E"''' and '''"T"''' are flow area flags for XZ type cross-sections (see ecf command "Flow Area" in <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW manualManual]</u> for more details). Specify an '''“E”''' to use effective area or a '''“T”''' to use total area when calculating the flow area. If neither is specified, the global value set using "<font color="blue"><tt>Flow Area </tt></font><font color="red"><tt>==</tt></font>" is used, the default flow area method is effective. <br>
<br>
'''"F"''' and '''"N"''' are vertical change in resistance for CS or HW type cross-sections. TheOnly '''''one''''' of the following should be specified:<br>
'''“F”''' for a multiplication factor; or<br>
'''“N”''' for a Manning’s n value.
|suggestions=Specify only '''''one''''' of either an "E" or a "T" for flow area flags or "F" or "N" for vertically varying resistance flags.
 
|discussion_page=* [[Talk:TUFLOW Message 1056|Discuss Message 1056]]
 
|link3=''
|link4=''
|prelink=[[TUFLOW_Message_1055|Message 1055]]
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
|nextlink=[[TUFLOW_Message_1057|Message 1057]]
}}
Retrieved from "https://wiki.tuflow.com/TUFLOW_Message_1056"