Difference between revisions of "TUFLOW Message 1158"
Jump to navigation
Jump to search
| (One intermediate revision by the same user not shown) | |||
| Line 5: | Line 5: | ||
|message_desc=A cross-section for the weir channel has been specified and the width attribute on the 1d_nwk file is being ignored. | |message_desc=A cross-section for the weir channel has been specified and the width attribute on the 1d_nwk file is being ignored. | ||
|suggestions=Check that the cross-section width in the .csv file for the weir is appropriate. | |suggestions=Check that the cross-section width in the .csv file for the weir is appropriate. | ||
| − | + | ||
| − | + | ||
| − | |||
| − | |||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
| − | |||
}} | }} | ||
Latest revision as of 15:31, 22 December 2022
TUFLOW Message
CHECK 1158 - Weir cross-section found (1d_nwk width ignored)
Alternate Message
NA
Message Type
CHECK
Description
A cross-section for the weir channel has been specified and the width attribute on the 1d_nwk file is being ignored.
Suggestions
Check that the cross-section width in the .csv file for the weir is appropriate.
| Up |
|---|
 1xxx Messages
|