Difference between revisions of "TUFLOW Message 1257"
Jump to navigation
Jump to search
| (One intermediate revision by the same user not shown) | |||
| Line 5: | Line 5: | ||
|message_desc=Channel is missing upstream and downstream inverts. | |message_desc=Channel is missing upstream and downstream inverts. | ||
|suggestions=Specify upstream and downstream inverts, via the 1D network channel, 1D network nodes snapped to end of channel or end cross-sections. | |suggestions=Specify upstream and downstream inverts, via the 1D network channel, 1D network nodes snapped to end of channel or end cross-sections. | ||
| − | + | ||
| − | + | ||
| − | |||
| − | |||
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | |uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]] | ||
| − | |||
}} | }} | ||
Latest revision as of 15:59, 22 December 2022
TUFLOW Message
ERROR 1257 - No U/S and D/S bed levels specified for channel
Alternate Message
NA
Message Type
ERROR
Description
Channel is missing upstream and downstream inverts.
Suggestions
Specify upstream and downstream inverts, via the 1D network channel, 1D network nodes snapped to end of channel or end cross-sections.
| Up |
|---|
 1xxx Messages
|