Difference between revisions of "TUFLOW Message 1333"

From Tuflow
Jump to navigation Jump to search
 
(2 intermediate revisions by the same user not shown)
Line 4: Line 4:
 
|type=[[ERROR]]
 
|type=[[ERROR]]
 
|message_desc=The "A" flags is used to set the structure losses to adjust.  This can only be used for a bridge or culvert channel, e.g. use 1D network type "CA" for a circular culvert with adjusted losses.  This flag is invalid for other channel types.<br>
 
|message_desc=The "A" flags is used to set the structure losses to adjust.  This can only be used for a bridge or culvert channel, e.g. use 1D network type "CA" for a circular culvert with adjusted losses.  This flag is invalid for other channel types.<br>
This flag overrides that set with the global <tt>Structure Losses == ADJUST or FIX</tt> command.
+
This flag overrides that set with the global <tt><font color="blue">Structure Losses </font><font color="red">== </font>ADJUST or FIX</tt> command.
 
|suggestions=Remove "A" flag from non-structure channel.
 
|suggestions=Remove "A" flag from non-structure channel.
|discussion_page=* [[Talk:TUFLOW Message 1333|Discuss Message 1333]]
+
 
|link3=''
 
|link4=''
 
|prelink=[[TUFLOW_Message_1332|Message 1332]]
 
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
 
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
|nextlink=[[TUFLOW_Message_1334|Message 1334]]
 
 
}}
 
}}

Latest revision as of 10:32, 23 December 2022

TUFLOW Message
ERROR 1333 - Invalid flag for channel <channel ID>: "A"

Alternate Message
NA

Message Type
ERROR

Description
The "A" flags is used to set the structure losses to adjust. This can only be used for a bridge or culvert channel, e.g. use 1D network type "CA" for a circular culvert with adjusted losses. This flag is invalid for other channel types.
This flag overrides that set with the global Structure Losses == ADJUST or FIX command.

Suggestions
Remove "A" flag from non-structure channel.


Up
Go-up.png 1xxx Messages